插装阀阀芯优化与仿真分析

插装阀在静止状态下，由于静摩擦的原因，导致阀芯与阀套出现卡滞现象；在运动状态下，由于压差和阀芯微偏移的原因造成阀芯与阀套发生磨损；为此提出一种新型的带有导流槽的插装阀阀芯。基于缝隙流动和液压卡紧分析，建立插装阀阀芯与阀套间隙的CFD优化仿真模型，通过N-S方程、伯努利方程和卡紧力方程联立得到阀芯与阀套间卡紧力的推导公式。基于CFD仿真模拟分析，比较新型阀芯与原阀芯不同模型间隙的切线应力、压力分布规律，结果表明：在入口压力为12 MPa时，原阀芯的切线应力在12 000 Pa上下波动，大于新型阀芯切线应力4 200 Pa；在入口压力为8 MPa时，原阀芯的切线应力在7 200 Pa上下波动，大于新型阀芯切线应力3 000 Pa；且原阀芯切线应力的波动范围远大于新型阀芯。新型阀芯在阀套间的受力更加平稳，磨损更小。研究结果为插装阀优化以及减少能量损失和改善润滑条件提供理论指导和依据。     

宁夏原州区生态移民村生境景观连接度变化及其驱动因素

[目的]分析生态移民土地利用过程中生境景观连接度变化及其驱动因素,为生态移民的生态风险管理及移民可持续性提供科学依据。[方法]以宁夏原州区"十二五"时期4个生态移民村(丰泽、金轮、和润及泉港)为例,基于2016年高分影像数据,同时参考移民前谷歌地球2010年数据和第二次全国土地调查数据(2010年),经野外GPS校验,通过计算障碍影响指数和生境景观连接度指数,分析生态移民村土地利用生境景观分异。[结果]丰泽村和金轮村的生境景观连接度呈下降态势,和润村和泉港村呈上升态势。4个生态移民村的变化趋势明显,但极高连接度和高连接度比例很小。生态移民村生境景观变化驱动力主要为人为因素,建设用地占用耕地、园地普遍,其中泉港村与和润村建设用地面积年均增长率分别高达27.49%和21.28%,同时金轮村、和润村、泉港村无后备土地资源,生态压力突出。[结论] 4个生态移民村人口密度增大导致建设用地占用耕地明显,生态用地被分割,移民的非农活动比重大造成耕地撂荒,景观破碎化和孤岛化现象明显,生境景观呈现出不稳定状态,生态压力增加。     

竹材弦面纵向切削的研究

研究了竹材弦面纵向切削的3种切削方式(单劈刀切削、单刨刀切削及并列式双刨刀切削)及单刨刀切削时的切削阻力,结果表明:对竹材采用劈或刨的切削方式,均可进行弦面纵向切削并能获得质量较好的竹蔑。竹材的节间、节部、切削厚度、含水率及切削速度等因素对切削阻力均有不同程度的影响。节部切削阻力明显高于节间切削阻力;切削阻力随切削厚度的增大而增大,两者成线性关系;含水率增大时,节间切削阻力减小,而节部切削阻力变化不大;切削速度增大时,节间切削阻力基本上是下降的,而节部切削阻力是增大的。     

砂垫层基础的设计与施工措施

在各类工程中砂垫层的作用不同,作者对软弱地基在结构设计中采用砂垫层这一措施进行了详细叙述。     

直列4缸内燃机双轴平衡系统设计

直列4缸平面布置曲轴内燃机存在不平衡的二阶往复惯性力,采用兰氏双轴平衡系统,可以平衡二阶往复惯性力,使内燃机的噪声和振动明显下降。     

土的弹性抗力与墩顶固结结构物的联合计算

将土、基础及上部结构物视为一个整体，在计入土的弹性抗力后对多跨无铰拱和连续刚构的上下部结构进行联合计算，并给出了算例，可供设计参考。     

华北山区草地资源及其生产力的研究

华北山区位于温带——暖温带，东经１０７°～１２３°，北纬３５°～４３°。包括山东丘陵区，太行山区，冀北辽西山地区，阴山山地区四部分。该区属于农牧业交错区，农业、牧业（农区牧业和草地牧业）、林业十分发达，并且在迅速发展。华北山区是我国小麦、玉米和杂粮的主要产区。草地类型多样，饲草料丰富，又是养牛业、养羊业、养猪业相当发达的地区。经统计，华北山区总人口为５６２９万，总土地面积３５４５万ｈａ，天然草地总面积为１５８８．９１万ｈａ，占土地总面积的４４．８２％，人均草地０．２８２３ｈａ。各个区的草地类型不同，生产力差异显著（ｐ＜０．０１）。     

Quantitative capillary reversed passive latex agglutination test for C-reactive protein (CRP) in the dog

A capillary reversed passive latex agglutination test (capillary RPLA) was developed which allows quantification of serum C-reactive protein (CRP) within approximately 15 min. The logarithmic regression line (calibration curve) obtained after measuring each CRP concentration three times in twofold dilutions of a standard canine serum containing 222 g/ml of CRP was y=6.394+0.030x (r=0.995). Capillary RPLA permitted quantification of CRP in the range 6.9–222 g/ml. The coefficients of variation ranged from 10.28% to 12.40%. The recovery rates (percentage recovery) of CRP by capillary RPLA were within the range 87% to 106%. On measuring the CRP concentrations in sera from 78 dogs by capillary RPLA, single radial immunodiffusion (SRID) and enzyme-linked immunosorbent assay (ELISA), close correlations were demonstrated between SRID and capillary RPLA (y=7.250+1.109x, r=0.978), between SRID and ELISA (y=3.042+1.059x, r=0.967), and between capillary RPLA and ELISA (y=1.778+0.929x, r=0.962). Capillary RPLA may be considered useful as a routine biochemical technique for measurement of serum CRP concentration in the dog.Abbreviations CRP C-reactive protein - ELISA enzyme-linked immunosorbent assay - RPLA reversed passive latex agglutination test - SRID single radial immunodiffusion     

The application of atomic force microscope in clinic diagnosis of erythrocytes

AIM: To investigate the application of atomic force microscope (AFM) in clinic diagnosis. METHODS: Topographic images and some parameters of large range field and microstructures of erythrocytes in the blood of normal subjects, lung cancer and myelodisplastic syndrome (MDS) patients were examined by atomic force microscope. RESULTS: Many clear topographic images of many erythrocytes, single erythrocyte, and microstructure of erythrocyte membrane surface were obtained. Many erythrocytes in lung cancer patients were found to change into echinocytes. One erythrocyte had 10-20 protuberances, most of which, with a mean width of 589. 0 nm and a length of 646. 7 nm, were on the edge of cells. The protuberances on the center of echinocytes are lodged and embedded. The erythrocytes of MDS patients were biconcave in shape. Many apertures with different diameters of tens to hundreds nanometer appeared on the surface of cell membrane. CONCLUSIONS: AFM can be widely applied in clinic pathological inspection, including quantification of cells, obtainment and comparison of many parameters (such as diameter, thickness, volume, surface, surface area/volume ratio), observation of topograph of single cell, and observation and comparison of membrane surface microstructure of cells, and so on.     

叶片开缝对单叶片泵径向力的影响

为了改善单叶片泵的运行特性,降低径向受力不均匀性,采用数值计算与试验相结合的方法分析了单叶片离心泵径向力的动态特性.研究了3个不同流量工况(0.6Q_d,1.0Q_d和1.4Q_d)下径向力的变化规律,结果表明,单叶片离心泵叶轮叶片工作面与背面所受压差是径向力产生的主要原因,并在小流量工况下径向力达到最值.通过对试验与数值模拟结果的分析对比,提出了平衡单叶片泵径向力的新方法-叶片开缝,并在叶片包角方向上选取3个不同位置(0°,90°和270°)布置宽度为1.0 mm的缝隙,分析了不同开缝位置对径向力及泵外特性的影响情况.结果表明:当在叶片尾缘开缝时,对泵的外特性影响较小,并可以较大降低单叶片离心泵叶片工作面和背面的压差,减小叶轮径向受力情况,提高单叶片泵的可靠性和使用寿命.